English
Español
IML oil drum mold is generally produced by 450-655T injection molding machine. When using injection molding machines with smaller tonnage, the problem of insufficient opening stroke will occur.
The main difficulty of IML oil drum mold is how to use electrostatic film
Kelong IML oil drum molds usually use side-access in-mold labeling systems, because the motion trajectory is shorter, you can get a more stable operation effect, and the in-mold time is shorter.
The hot runner with needle valve is used to feed the mold, which reduces the feeding pressure and optimizes the molding cycle.
The hot runner with needle valve is used to feed the mold, which reduces the feeding pressure and optimizes the molding cycle.
.jpg?imageView2/2/format/jp2 "Daily Storage Basket Mould (Large)")
.jpg?imageView2/2/format/jp2 "Storage Basket Mould (Small)")
